CORBIN H-AT-16-L LOW SEAT AFRICA TWIN 16-18

$415.00
(No reviews yet) Write a Review
SKU:
H-AT-16-L
Shipping:
Calculated at Checkout

CORBIN H-AT-16-L SEAT AFRICA TWIN 16-18 SADDLE 

HONDA AFRICA TWIN CRF1000 CRF 1000 1000L CRF1000L  16 17  2016 2017  18 2018

DESIGN YOURS HERE!

http://media.corbin.com/config/hat16h/#hat16h_3_nowelt.pfs?width=2400&p.tn=Black_Bomber_Jacket.png,Black_Grabber.png,No_Welt.png,Red.png,Red.png&p.c=,,,,&p.on=&wildCard=none&thePrice=473.00&thePart=H-AT-16-L

 

Measurements:

Rider seating: 12.5" wide x 16" long x 4" deep
Passenger: 11" wide x 10.5" long
Approx seat height: 34.5"

Corbin has replaced the two piece stock unit with a single piece model to provide more structural support and the ability to accept a removable passenger backrest. We've built two models, one to emulate the seat height of the stock seat in the upper position and one to provide an easier ground reach like the stock seat in the low position. By designing each seat specifically, we were able to keep excellent ergonomics and a properly neutralized seating platform.

Naturally, we set out to design them to fit the bike visually as well as improving the quality of your ride... Corbin's dual saddle does just that! Our high density Comfort Cell foam allows a sleek profile while providing a firm supportive ride that lasts. Rider seating is ergonomically shaped to fit the curve of your body and provide better weight distribution. This also helps to eliminate the centralized pressure felt from the stock seat. In the nose area, we sculpt the saddle narrow to allow for good ground reach.

Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shaping provides an excellent contact patch while maintaining a clean look. This gives your passenger excellent comfort. For additional comfort and feeling of security, the Corbin saddle works with an optional removable passenger backrest. Simple to install with just a single bolt under the saddle and fully adjustable to provide a tailored fit.

We offer several backrest models to suit your taste visually and the degree of support desired. For the best combination of looks and support, we recommend the #02-SB model Ovalbac backrest shown. This backrest provides a generous, contoured contact patch for excellent support. Angle adjustment is simple and can be performed without removing the saddle or backrest from the bike. Please note, the Corbin backrests may not work in the saddle if you are using the Honda trunk.

Notice how close the Corbin saddle fits to the tank, tail section and sides... this kind of fit comes only from a Corbin saddle and our unique Fibertech basepan. Our rigid base material not only fits perfect to the bike, but provides a firm foundation to support the carefully designed foam shape. Corbin's ergonomic shaping creates a visually pleasing look on the motorcycle and adds to the custom appeal.

For an added luxurious touch, this saddle is available with the option of electric seat heaters. With the flip of a conveniently located switch built into the left side of the saddle, both the rider and passenger seating platforms will heat up and maintain temperature automatically. Simple to install with just a pigtail wiring to your bike's fusebox. All other components are built into the saddle and come preinstalled.

On top, we include genuine leather seating panels for a luxurious ride. The design shown above includes Black Grabber seating with Asphalt vinyl contrasting sides and nose with a tasteful color coordinated welt. A wide variety of material and color options are available to suit your taste. Notice we've also designed one with Red leather seating and Asphalt sides to coordinate with the hard to find Red Africa Twin.

We recommend genuine leather seating in all of our saddle models because it breathes with your body and will conform along with the foam shape during break in. This provides an added bit of luxury on those long rides. In the side panels, we use a coordinating vinyl material that will support the foam shape and keep the saddle looking sharp longer. Be sure to care for you leather saddle properly with a quality conditioner like our Saddle Cream. This will help the leather to remain supple and weather resistant while it matures gracefully.

Corbin's saddle is designed to work with the optional Honda saddlebags. Mounts to the motorcycle similar to stock and secures with the Honda key lock system. All brackets are included and premounted on the seat so it's ready for immediate installation.

Want to add a bit of convenient storage without installing a trunk? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the #02-SB Ovalbac or #297-SB backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black. See Accessories tab for additional information and ordering.