GRAVES SPORT EXY-16YXZ-FTT FULL EXHAUST SYSTEM
TITANIUM MUFFLER W CARBON FIBER CF END CAP
TITANIUM HEADER HEAD PIPE / COLLECTOR
Yamaha YXZ 1000r YXZ1000 1000 YXZ-1000 YXZ1000R
16 2016 17 2017
This Graves Motorsports full YXZ exhaust is designed for the racer seeking the elite performance and materiels. We did not allow compromises in the development of this system. Material diameters, lengths, the silencer core size and length are optimized for maximum power output throughout the throttle and RPM range.
We use the same 1.00 MM think wall high heat grade Titanium tubing used on our Superbikes. This material is designed special for maximum durability and oxidation resistance up to 800*Celsius / 1472*Fahrenheit. It is designed to live at almost twice the temperature of normal Grade2 Titanium. The tubes are precision bent and cut with the latest equipment available. The tubing is then welded in fixtures designed so that repeatability is second to none. It comes with a single Lambda receiver bung for on track data logging or Dyno tuning. The spring tabs are made from 4MM thick Titanium wire for long life.
The silencer is one piece with the tail pipe welded to aTitanium entrance cap and attaches to the collector with a 60.5 MM machined Titanium joint for a perfect fit every time. The silencer is hung with an Aluminum bracket machined from billet 6061 T651 and anodized silver. The silencer sleeve is made of Titanium that attaches to the carbon end cap with stainless aircraft grade rivets and Titanium silencer bands. The inter core tube is made of stainless that slips over the entrance and into the exit cap that is a stamped from Titanium and welded to a 60* slash cut Titanium tube covered with a Carbon Fiber beauty cover.
This system performs like our superbike pipe and shows like jewelry. - Chuck Graves
- Headers designed for the maximum power output
- Single Lambda sensor comes standard
- Constructed from Aerospace grade hi heat Titanium alloys
- Advanced welding process showcases laser perfection welds
- Long Tapers with Precision fitment and "butt" welds
- Spigots designed to retain factory oem gaskets during the installation process a Graves exclusive that make installation easier and keeps the gaskets in place.
- Flanges are made from 7075 hard anodized aluminum. Built to last!
Installation instructions from the tabs listed above.
Exhaust System Saves 14.5 lbs. over stock setup.
83 db at Idle / 96.5 db at 4000 rpm
Fitment: Yamaha YXZ 1000r 2016 - 2017