• Take "cable calculation" headaches out of swapping handlebars
• Kit includes LA Chopper's Twin Peaks black touring handlebars along with handlebar wire extensions, stainless steel clutch lines and brake lines covered in a black smoke tinted coating with pure black fittings, black T-brake line junction, banjo bolts and copper crush washers you need to do a complete handlebar swap
• Made in the U.S.A.

NOTE:  FOR MODELS W/ABS

(1) 1-1/4" Black steel handlebars

(2) Black aluminum half clamps

(1) 80" Midnight vinyl hydraulic clutch line W/(1) 3/8"/10mm 25 degree banjo fitting and (1) 3/8"-24 inverted flare

(1) 70-1/2" Midnight vinyl brake line W/(1) 12mm straight banjo fitting and (1) 3/8"/10mm 30 degree banjo fitting

(1) 72-1/2" Midnight vinyl brake line W/(1) 3/8"/10mm 90 degree banjo fitting and (1) 3/8"/10mm  20 degree banjo fitting

(1) 78-1/2" Midnight vinyl brake line W/(1) 3/8"/10mm 90 degree banjo fitting and (1) 3/8"/10mm 20 degree banjo fitting 

(1) 72" Black braided cable wrap

(2) Cab-bus wire harnesses

(1) Throttle by wire harness

(2) 12" Heat shrink tubing

(2) 3/8"/24 Banjo bolts

(12) 3/8"/10mm Copper crush washers

(2) 12mm Copper crush washers

Instructions